December 1, 2021

Best Rifle Scope for Deer Hunting


Looking for the best riflescope for the upcoming deer season? I understand! The hunting season isn’t as long as I would like and the amount of time I can spend in the field isn’t as much as I want. So, I always want the highest-quality gear I can afford when heading out so I don’t miss that critical shot.

Man using a rifle scope for deer hunting
Most deer are shot inside 200 yards and shots are made quickly. A hunting scope should be as fast and easy to use as iron sights.

Today, I’m sharing some information I’ve learned over the years about rifle scopes. I hope my experiences will help guide you when setting up your deer rifle for the hunting season.

A Brief History of Rifle Scopes

This might surprise you, but riflescopes pre-date the Civil War. The first scopes were barrel-length tubes with small, dim fields and fragile innards. While they don’t have the same quality of modern optics, they were an improvement over standard sights.

Zeiss listed a short “prism” scope around 1904, soon after the J. Stevens Tool Co. began building scopes stateside. A few years down the road, U.S. scope-makers proliferated during the Great Depression. More people taking to the field to feed their families with deer meat might have played a role in this.

Redfield Accu-Range scope ad from 1968
In this 1968 advertisement, Redfield demonstrated how its Accu-Range scopes helped shooters estimate distance using the reticle.

Bill Weaver invented his Model 330 in 1930. The 10-ounce 3x sight had a 3/4-inch steel tube and internal W/E (windage/elevation) adjustments. It sold for $19. While that sounds like an extraordinary deal, in today’s dollars that would be a little more than $300. That’s still a good price for a quality optic.

By the time Weaver rolled out the Model 330, Zeiss acquired Hensoldt and offered variable power scopes. Soon thereafter a Zeiss engineer found coating lenses with magnesium fluoride made images brighter. Fog-free scopes arrived shortly after WW II, at Leupold & Stevens. Scope prices had moved little since the ’20s.

Lyman All-American scope with Perma-Center reticle
The above image is from a 1966 Lyman advertisement for the All-American scope with the Perma-Center reticle.

Until the 1950s, adjusting W/E dials sent the reticle out of the field’s middle. To keep it centered, engineers placed the erector pivot at the tube’s rear, where the reticle was. In 1962, a year after Leupold announced its Vari-X 3-9x, Lyman began fitting All American scopes with Perma-Center reticles. I began deer hunting a few years later. The most popular scope of that day was Weaver’s K4, a 9-ounce, $45 optic that had appeared in 1947.

Scopes have since grown bigger, heavier, more powerful and more complex. This is not always a good thing for deer hunting rifles. While improved optics are always welcomed, the cost – both in terms of price and weight – can push them out of consideration by many hunters.

1979 ad with Bushnell BDC scope for hunting
Bushnell extolls the virtues of its Bullet Drop Compensator in this 1979 advertisement.

Swarovski recently announced a 5-25x52mm scope with a fat 40mm tube. The 38-ounce dS is a feature-laden laser-ranging sight with “digital intelligence.” A heads-up display shows ballistic data (downloaded from your smartphone) relevant to each shot. Pressing a button on the eyepiece puts a lighted dot where your bullet will land, the dS having factored in not only distance, but air pressure, temperature, and shot angle.      

Such optics drain savings accounts. While hunting rifles list for five or six times what they did in the 1960s, scope prices have vaulted through the four-figure barrier into the stratosphere.

The Foundation          

Before raiding Junior’s college fund to give your rifle new glass, think of how it will actually help you harvest deer this hunting season. Some features have little utility. Some can even limit your success.

Image of woman hunting at dusk
Big objective lenses keep images bright at high magnification during the dim hours at dawn and dusk.

Every scope worth owning has coated lenses, which reduce light lost to reflection and refraction (the bending of light beams passing from one medium to another of different refractive index). These two gremlins can steal 4 percent of incident light at each uncoated glass-air surface in a scope!

Magnesium fluoride, a colorless, low-refraction compound, has given way to multiple coatings of rare earths affecting specific wavelengths. Fully multi-coated optics (every lens, several coatings) yield the brightest images.

Springfield Waypoint rifle set up with scope for deer hunting
Springfield’s Waypoint rifle uses a Picatinny rail scope base, so this 45mm objective easily clears the barrel.

External lens surfaces also benefit from abrasion-resistant coatings – and from hydrophobic or hydrophilic coatings that bead or “slip” water, for distortion-free aim in rain. It doesn’t matter if you stalk on the ground or sit in a treestand, the weather will always assert itself. A hydrophobic coating on the lenses can help.

Soon after the 1947 debut of its 4x Plainsman, Leupold & Stevens borrowed a Merchant Marine process to fog-proof scopes, replacing air with nitrogen gas inside. Argon is now used too. Fog-proofing is a must – and, like fully multi-coated lenses and centered reticles, is now standard in high-quality optics.

The high resolution found in modern scopes helps you distinguish detail. In good light, a healthy human eye can resolve detail down to a minute of angle, or about 1 inch at 100 yards. Magnification multiplies that level of resolution.

Deer hunter with buck at sunset
This prairie buck fell to the author’s .30-06 at 100 yards. His scope was set at 4x, “as it almost always is.”

ED or extra-low dispersion lenses have resolution-enhancing compounds. Fluorite, an optical form of the crystal fluorspar (calcium fluoride) boosts resolution, as does fluoride glass with zirconium fluoride. These are frequently found in the best deer rifle scopes.

Glass-etched (acid-engraved)reticles are replacing suspended reticles, horsehair to spider webs. The first- or front-plane reticle, standard in Europe, is gaining traction stateside in long-range scopes. It doesn’t move with power changes so cannot cause a change in point of impact. Because its dimensions remain constant relative to the target throughout the power spectrum, the reticle quickly helps you range the target at all settings.

On the other hand, the apparent change in reticle “thickness” runs counter to what’s useful. In deer cover, magnification turned down for fast shooting at big targets up close, the reticle can be hard to see. At high magnification, targets that beg fine accuracy but are shrunk by distance may be obscured by the suddenly heavy reticle.

Rear- or second-plane reticles don’t shrink or grow and remain popular with most U.S. hunters.

Check out Richard Johnson’s article on the differences between first and second focal plane scopes.

On Target

The best-selling reticle now is the “plex” (with brand-specific prefixes). Pioneered by Leupold’s Duplex, it’s essentially a crosswire with thick outer posts to catch your eye and thin center lines for fine aim.

Ballistic Plex reticle in Bushnell scope
Burris’ Ballistic Plex is a clean, simple range-finding reticle, versatile and fast, a champ on deer rifles.

For deer hunting, you won’t find a more versatile design.

The German #4 lacks the top post, which also suits me. Range-finding reticles with, say, three tics on the lower post to bracket distant targets, can help with long shots. But beware the busy reticle that distracts. For fast, sure aim, simple is good.

Range-compensating scopes absolve you of hold-over. The Burris Eliminator has a laser-ranging device, programmed with load data to yield a lighted aiming point for a center hold at any practical range. A Bluetooth link between external lasers and other scopes is a recent option.

Man with buck taken a close range during deer hunting season
This buck was killed 20 steps from the rifle. The hunter wisely had the power dial at its lowest setting.

In my view, the best assist for long shots is the trajectory-matched elevation dial. Many scope-makers offer one at no cost. Specify the factory load, or provide data from your handload, and the dial is manufactured so you can “dial to the distance.”

That is, instead of counting clicks, minutes or mils, you spin to the number matching the range – say, 4.5 for 450 yards. The bullet strikes point of aim. I’ve used scopes with such dials since GreyBull Precision installed one for me years ago. It’s a quick way to adjust for bullet drop, and more accurate than hold-over. No added weight, bulk or complexity in the scope.

Scope tube size differences
Strong, lightweight, one-piece scope bodies (Leupold tubes are shown here) are now CNC-machined from tube stock.

The lust for long-range hits has fueled demand for large-diameter scopes that permit the erector tube inside more room to move, increasing range of W/E adjustment. A 30mm scope may also have larger erector lenses than does a 1-inch (25.4mm) tube, but many do not.

Dialing It In

Crisp, repeatable windage and elevation adjustments are a must if you expect to dial in the field. To check values, I “shoot around the square” on paper, 20 clicks at a time: first right, then down, then left, then up, using the same point of aim.

Trajectory matching dial for hunting scope
The best path to sure hits at long range is with a trajectory-matched dial, free now with many scopes.

Quarter-minute clicks should deliver groups 5 inches apart, the last doubling the first. Resettable dials can be indexed to “0” after zeroing. A zero stop sets a travel limit, for no-look return to “0.” I seldom move dials on hunts, so don’t fret if the clicks defy reason. Dials on one of my scopes move impact 4 inches horizontally, 5 inches vertically per click! But this ancient sight holds zero. I hunt with it.

An AO or adjustable objective sleeve on the front bells of target scopes let competitors fine-tune target focus. It also eliminated parallax error – an apparent shift of the reticle when the shooter’s eye was off the sight’s optical axis. Short hunting scopes didn’t need an AO. They were typically set for parallax-free aim at 150 yards, where the target image and reticle fell on one plane inside the scope. Preventing error at other distances was as simple as centering your eye behind the scope. A turret-side parallax/focus dial has all but replaced the less-convenient AO sleeve and now appears on good hunting scopes, whose generous exit pupil at low power won’t warn you of off-axis aim.

Minutes vs. Mils

You can now get scopes with reticle graduations and clicks in either minutes or mils. A minute of angle is 1.047 inches at 100 yards, twice that at 200 and so on. Mil is shorthand for milliradian, a slice of a circle. It has nothing to do with “military,” though snipers are trained on mils.

Kahles deer hunting scope with mils dial
This Kahles K624i is packed with features including reticle illumination control and a parallax/focus dial under the elevation dial. Clicks are in mils.

Like a minute, a mil is an angular measure. It spans 3.6 inches at 100 yards, 3 feet at l,000. In mil dot reticles, the 3/4-minute dots on a crosswire are a mil apart. To determine range, divide target height in mils at 100 yards by the number of spaces subtending it. Result: range in hundreds of yards. If a buck 3 feet tall at the back (10 mils at 100 yards) stands two dots high in the scope, you divide 2 into 10. The deer is 500 yards away. You can also divide target height in yards by the number of mils subtended and multiply by 1,000 to get range in yards. A mil dot reticle words as range-finder at just one power setting, usually the top setting in variable scopes.

Zooming In

For decades, hunters have carried variable scopes with “three-times” magnification ranges. That is, top magnification was three times the bottom. Think 3-9x, 4-12x. Now there are five-, six-, even eight-times scopes. Engineers tell me the broader ranges add weight, cost and complexity, and make aberrations hard to control. Most wide-range variables have 30mm tubes or bigger, albeit Swarovski lists a five-times Z5 3.5-18×44 on trim 1-inch pipe.

Scope tube comparison
Swarovski’s digital dS with 40mm tube dwarfs the 1-inch Z3 3-9×36, one of the author’s favorite sights.

For me, the best scope for deer hunting is a fixed-power 4x. Alas, few survive. Among variables, Swarovski’s 3-9×36 and Leupold’s 2.5-8×36 appeal to me, for their lightweight, modest objective size and practical power range. I’ve used heavier optics of superior optical quality from Zeiss, Leica and Meopta, but think a scope should not exceed 15 percent of the rifle’s weight.

Shopping for a hunting scope? Remember it’s a sight. It must leave your rifle feeling like a rifle.

Editor’s Note: Please be sure to check out The Armory Life Forum, where you can comment about our daily articles, as well as just talk guns and gear. Click the “Go To Forum Thread” link below to jump in and discuss this article and much more!

Join the Discussion

Go to forum thread



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *

Are you excited?We have 100 Hawkeye Slings to Giveaway (FREE)

Don’t miss the chance to participate in the biggest giveaway of this year.